HQ-STYLE-000041QA passed with warnings

Haircut · Lob

Shoulder-Length Lob with Invisible Layers

A shoulder-to-collarbone lob with a soft center part, subtle internal layers that create movement without visible steps, and a polished natural perimeter.

Book this style Check it against my hair

Available as a mobile service at homes, offices, and hotels across Greater Montréal.

Three-quarter view of a shoulder-length lob with subtle internal layers — Reference angle explorer
Drag or swipe · horizontal scroll or Shift + wheel · arrow keys
2 / 4
Fashion white · target #F2F0EA
Current documented coverage: four verified angles from 0° to 180°. A continuous 360° turntable publishes only after 24–36 consistent frames pass registry QA.
Showing three-quarter view at 20°.

Required registry views

One cut. Four viewpoints.

A single portrait can hide the taper, fade height, crown, weight line, or neckline. Every published Hairqut record must show the construction from the front, three-quarter, side, and rear. The recorded fashion white backdrop keeps the silhouette readable while preserving fine strand detail.

Front view of a shoulder-length lob with a center part and invisible internal layers — Front0°
Documents the center part, front balance, soft movement, and shoulder-grazing perimeter.

Side90°

Exposes the crown fall, side weight, hidden layer movement, and complete perimeter.

Rear view of a shoulder-length lob showing a softly shaped perimeter — Rear180°
Documents rear density, subtle internal movement, bilateral balance, and collarbone outline.

Hairqut Style Blueprint · Cut geometry

A visual brief your professional can use.

The registered views establish the reference. This blueprint pins the most important construction decisions directly to those source views, then makes adaptation, maintenance, and the chair-side conversation clear.

Verified-angle cut map

Approved-view invisible-layer lob map

The approved front, side, and rear registry views are annotated only where the soft center part, long connected face frame, intact surface length, shoulder-to-collarbone perimeter, retained rear density, and soft natural ends are visible. The diagram does not pretend to reveal the hidden internal layer map, sectioning, elevation, cutting path, or weight-removal depth.

3 publication views · 6 callouts

Annotated front construction map for Shoulder-Length Lob. Front view of a shoulder-length lob with a center part and invisible internal layers — Center part and connected front
The front view establishes the soft center balance and long pieces that return into the main perimeter without becoming a separate fringe.
01
Soft center part
The visible part sits near center and divides the front with a natural, low-tension fall
02
Long connected face frame
Front pieces move around the cheek and jaw while remaining long enough to connect into the lob outline

Side90°

Approved publication view

Surface fall and finished perimeter

The profile shows an unbroken outer surface falling to a compact shoulder-to-collarbone edge with subtle movement.

Intact surface length

The outer silhouette remains long and continuous without short shelf layers visible at the crown or side

Shoulder-collarbone perimeter

The finished edge sits through the shoulder-to-collarbone zone in this registered result

Annotated rear construction map for Shoulder-Length Lob. Rear view of a shoulder-length lob showing a softly shaped perimeter — Retained density and natural ends
The rear view confirms a full central fall and a softly irregular outline rather than a stacked or visibly shelved shape.
01
Retained rear density
Visible fullness remains through the rear surface and lower shape despite the recorded internal movement
02
Soft natural ends
The lowest outline is compact but softly varied, without a hard geometric line or short stacked graduation

Pins locate the reference evidence; the numbered notes make the request legible in the chair. This is an original Hairqut communication diagram, not a universal service prescription.

Provenance: The diagram uses the locked approved publication views, which mirror the formal evidence package byte-for-byte. Its HTML and SVG overlays preserve those pixels and keep every label responsive and accessible. A newer generated raster passed exact-label and hidden-anatomy restraint review but remains internal because it recomposed the portraits and rasterized critical meaning.

Reference result

A shoulder-to-collarbone lob with a soft center part, long connected front pieces, retained surface density, subtle internal movement, and a polished natural perimeter.

Starting-state gate

A professional must assess dry and wet length, texture, density, porosity, shrinkage, growth direction, existing layers, condition, and service history before choosing how much internal weight can be removed.

Invisible means evidence-limited

The finished views support movement without obvious shelves, but they cannot reveal the hidden section map, elevation, subsection size, or exact weight-removal method.

Full specification · evidence graded

What is known, what must be assessed.

Every field is marked by its evidence boundary. “Unknown” is intentional: the registry never invents hidden technique, anatomy, timing, or price.

Construction

Technical specification

Finished length: The registered result finishes through the shoulder-to-collarbone zone; the exact dry position must be personalized.; Recorded
Part: A soft near-center part balances the visible front and crown fall.; Visible
Face frame: Long front pieces move around the cheek and jaw and reconnect into the main perimeter without forming a separate fringe.; Recorded
Surface length: The outer layer remains visibly long and continuous, with no short crown shelf or abrupt side step.; Visible
Internal layers: The canonical record describes internal weight removal that creates subtle movement without obvious shelves; the hidden layer placement is not visible.; Recorded
Rear density: Visible fullness is retained through the rear surface and lower outline.; Visible
Perimeter: The compact outline is softly irregular and natural rather than sharply blunt, stacked, or heavily graduated.; Recorded
Weight line: No distinct shelf or stacked weight line is visible; fullness resolves through the lower silhouette.; Visible
Sectioning and elevation: The hidden section map, subsection sizes, elevation, overdirection, and internal connection points are not established by the approved views.; Unknown
Cutting and weight-removal method: The record mentions subtle graduation or channel work as possible intent, but it does not establish a universal shear, razor, texturizing, depth, angle, or sequence prescription.; Unknown
Guards, fade, taper: Not part of this shoulder-length lob reference.; N/A
Neckline: The hair falls over the neckline; no separate neckline finish is specified.; N/A

Adaptation

Hair and suitability

Reference texture: The registry records a 1C–2A visual reference at medium density; this is not a suitability limit or guaranteed finish.; Recorded
Texture and natural fall: Assess straightness, wave, bend, frizz tendency, and dry fall before fixing perimeter position or internal movement.; Assess
Density distribution: Assess front, side, crown, rear, and end density before removing internal weight or preserving a fuller outline.; Assess
Porosity and finish response: Not recorded; assess absorption, dryness, buildup, chemical history, and response to conditioning, heat, and finish categories.; Assess
Shrinkage and shoulder interaction: Assess wet-to-dry change and how the hair bends or lifts against the shoulders before setting the final edge.; Assess
Growth direction: Parting habits, crown direction, cowlicks, and front growth affect symmetry, face connection, and natural fall.; Assess
Condition and service history: Assess breakage, weak ends, previous layers, colour or chemical services, and repeated heat before internal weight removal.; Assess
Face shape: No universal face-shape claim is supported; personalize part position, front connection, and finished length to the person and goal.; Assess
Achievable starting state: Enough healthy length and density must remain through the front, surface, rear, and ends to support a connected lob after internal adjustment.; Assess
Finish dependence: Apparent smoothness, bend, separation, fullness, and perimeter position vary with natural texture, humidity, drying method, heat, product, and shoulder contact.; Recorded

Service handoff

Booking service: womens_haircut
Appointment duration: Not specified in canonical evidence; confirm after length, density, existing layers, condition, dry-fall review, and finish expectations are assessed.
Price: Not stored in this style record; the current booking service controls price and any corrective, colour, chemical, or extended finishing work requires separate confirmation.

Professional requirements

Skills

Setting a shoulder-to-collarbone perimeter from the person's natural dry fall and shoulder interaction
Removing internal weight while preserving an intact outer surface, retained density, and connected front
Adapting sectioning and technique to texture, density distribution, condition, existing layers, and service history
Finishing soft movement without turning the result into a visible shelf, stacked bob, separate fringe, or over-thinned outline

Tools and product categories

Professional shears, combs, clips, and section-control tools selected for the assessed hair and intended outline
Internal weight-removal or texturizing method selected only after density and condition assessment
Low-tension drying or finishing tools appropriate to the natural texture and agreed result
Conditioning, heat-protection, smoothing, or flexible-finish categories chosen for porosity, condition, scalp, and routine

Safety and starting state

Confirm before service

Current wet and dry length, shoulder interaction, existing perimeter, parting habit, and front connection
Texture, wave pattern, shrinkage, density distribution, porosity, growth direction, and scalp condition
Existing layers, weak or split ends, breakage, colour or chemical services, and heat history
Desired fullness, movement, air-dry behavior, heat tolerance, styling effort, and maintenance preference

Do not promise unchanged

Do not promise a collarbone position from materially shorter hair or without accounting for shrinkage and shoulder lift.
Do not remove internal weight where low density, breakage, weak ends, or prior over-thinning cannot support a full connected outline.
Do not cut short visible shelves, a separate fringe, or stacked graduation while representing the result as this invisible-layer lob.
Do not prescribe an elevation, channel depth, razor or shear path, texturizing amount, heat setting, or product formula without assessing the current hair.
Do not promise the polished 1C–2A reference finish from a materially different texture, density, porosity, condition, humidity, or styling routine.

Evidence and governance

Source package: os/hairqut-styles/registry/entries/HQ-STYLE-000041-shoulder-length-lob-invisible-layers

Asset relationship: All four approved publication images mirror the formal package byte-for-byte.

Generated media: The approved style views depict a fictional AI-generated subject; the underlying generation model and request ids are unavailable. The on-page diagram is a deterministic overlay on those locked views. A newer generated composite passed exact-label and hidden-anatomy restraint review but remains internal because it recomposed the portraits and rasterized critical meaning.

Privacy: No real customer photo, identity, or biometric record is used in this Blueprint.

Booking handoff: The Blueprint links to the existing womens_haircut service; duration, price, availability, corrective scope, and any colour, chemical, or extended finishing work come from the current booking and consultation flow.

Freshness

Asset quality and provenance package assessed 2026-08-01.
Blueprint geometry, internal image-generation evaluation, and full specification reviewed 2026-09-12.

Consultation

Confirm the perimeter, density, and hidden-layer intent

Set the target perimeter in the hair's natural dry position and confirm whether the shortest point may sit at the shoulder or must remain at the collarbone.
Agree that the outer surface should stay long and connected, without a visible shelf, short crown layer, separate fringe, or stacked-bob silhouette.
Ask the professional to assess texture, shrinkage, density distribution, porosity, condition, existing layers, growth direction, and chemical or heat history before internal weight removal.
Confirm the desired balance between polished smoothness, natural bend, air-dried movement, and retained fullness at the perimeter.

Care plan

Keep the intent, not a fixed schedule.

1
When the perimeter loses its intended position
Recheck length in the natural fall
Growth, shoulder contact, texture, and styling can change where the edge sits; reassess before shortening or rebuilding internal movement.
2
Typically 8–12 weeks
Refresh conditionally
The recorded range is general planning guidance, not a universal schedule; growth, end condition, shape preference, and styling routine determine the actual cadence.
3
On styling days
Preserve movement without coating the outline
Use an assessed low-tension drying approach and only enough smoothing or flexible-finish product to support separation and movement.
4
If the ends weaken or the surface thins
Pause further internal removal
Reassess breakage, chemical or heat history, density, and end condition before adding texture or reducing more internal weight.

Home kit

Product categories, not product pressure.

Cleanse

Gentle cleanser category

Choose formula and frequency for the current scalp, porosity, buildup, service history, and routine.

Condition

Lightweight conditioning category

Support slip and end condition without assuming one moisture level suits every 1C–2A appearance.

Protect

Heat-protection category when heat is used

Confirm formula and temperature plan with the professional; no fixed heat setting is established by this record.

Finish

Light smoothing or flexible-finish category

Use sparingly so the surface remains separated and the perimeter does not collapse into a coated block.

These are care and tool categories, not paid placements or a substitute for professional texture, density, porosity, condition, service-history, and heat assessment. No brand claim, fixed heat setting, universal refresh interval, or guaranteed air-dry result is present.

Professional brief

Hand this evidence-bound invisible-layer lob brief to your professional

Use the four approved registry views to align on visible perimeter, surface length, face connection, density, and finish, then let the professional determine whether and how the current hair can support hidden internal weight removal.

The four approved registry views and the warning that the hidden layer map is not visible
A soft near-center part and long front pieces connected into the perimeter
An intact outer surface without short visible shelves or a separate fringe
A shoulder-to-collarbone outline with retained rear density and softly natural ends
A texture, shrinkage, density, porosity, condition, growth-pattern, service-history, and styling assessment

Book with this Blueprint

Blueprint v1.2 · reviewed September 12, 2026. Every diagram pin and technical field was checked against the approved front, side, or rear publication view, the locked canonical record, and the formal evidence package. Hidden layer placement, sectioning, elevation, weight-removal depth, tool path, natural dry response, porosity, timing, price, and continuity across AI-derived views were left unknown or assessment-required rather than inferred.

Canonical reference data

The source record behind the Blueprint.

These are the canonical attributes of the illustrated record. The Blueprint above translates them for a consultation; this section keeps the technical source explicit.

Finished length: Shoulder to collarbone
Reference texture: 1C–2A, medium density
Layers: Invisible internal
Finish: Polished with soft movement

Cut construction

Perimeter: A compact shoulder-to-collarbone outline with softly irregular natural ends.
Layers: Internal weight removal creates movement without obvious shelves or short surface layers.
Part: A soft center part balances the front and crown.
Face frame: Long pieces connect gently into the perimeter without becoming a separate fringe.
Finish: A smooth natural blowout preserves fine strand separation and subtle bend.

Quality assessment

Visible, not implied.

94/ 100

Publication threshold: 85. Assessed August 1, 2026.

Identity consistency93

Haircut geometry94

View compliance100

Hair realism95

Anatomy realism95

Photography consistency94

Provenance completeness95

Why this record passed with warnings

The rear perimeter appears marginally fuller because more of the internal movement is visible from behind, while the shoulder-to-collarbone length remains consistent.
OpenAI built-in image generation was used; the underlying model identifier is not exposed by this surface.
AI-derived viewpoints are internally consistent illustrations, not proof that one physical subject was photographed continuously from four angles.

Registry provenance

100% AI-generated from scratch.

The four images are an intentionally matched fictional reference set made specifically for this Hairqut record. Fictional person; no real person or celebrity was used as a reference. The set passed deterministic asset checks and a separate visual consistency assessment.

Generated media record: OpenAI built-in image generation via ChatGPT. underlying model identifier not exposed.

Get this style in Montréal Browse registry